Multi-Moulder · Soft Corner Attachment

M645 Multi-Moulder

Bringing the art of moulding to new heights. Designed for the progressive architectural woodworker — straight, curved, and soft-cornered profiles on one machine.

7.5 HPMotor
0–30 fpmVariable feed
6½"Max cut

Request a Quote Watch It Run

The moulder that makes a unique statement.

The M645 is designed to meet the needs of the progressive architectural woodworker — the shop that isn't satisfied with straight mouldings alone.

Can your moulder make soft corners? The M645 can — and it goes from straight to curve in just one setup, no accessories required. Bar rails, stair components, and crown mouldings come off the machine in a single pass.

Thanks to a linear tracking system that guides the workpiece smoothly and directly under the cutter head, the M645 handles profiles most shops outsource. The numbers work out — it pays for itself on curved work alone.

What the M645 does better

Straight to curve — one setup

No accessories, no breakdown. Swap the feed direction and keep working.

Soft Corner Attachment

An exclusive Mikron capability — can your moulder make soft corners? This one can.

Separately adjustable feed rollers

Enable multiple passes on heavy profiles without a fight.

Reversible 6,000 RPM spindle

Cutterhead direction control lets you optimize for grain and finish.

Floating worktable

Mechanically adjustable fence keeps positioning fast and repeatable.

Axial adjustment

Fine-tune horizontal positioning without removing the cutterhead.

The M645 on the shop floor

Curved crown moulding produced in a single setup.

Technical specifications

Unit size	34" W × 30" D × 65" H (5' min. front-to-back clearance)
Worktable	38" W × 24" D
Weight	Approx. 1,400 lbs
Motor	7.5 HP
Arbor	1¼" diameter, 6" long
Spindle	6,000 RPM (reversible)
Feed rate	0 to 30 feet per minute (forward and reverse)
Cutting circle	Horizontal: 6½" max · Tilted: 6" max
Thickness capacity	7" max
Cutter head	Standard 4" diameter, 2-knife corrugated back (1 included)