Live in the Ottawa Valley and Need:

• Interior Doors
• Mouldings
• Hardware

Don Lea Lumber Ltd. has it all!

Get Measured Up!

For a Free Measure & Quote please contact:

Telephone: 613-433-9391
Toll-Free: 1-800-496-4589
Email: jeremie@mikronmachinery.com

The unique design of the Mikron barn-style door track allows it to overcome this major issue. With fully adjustable mounting points you can attach to the existing studs or any strong mounting point within the track's length. An integrated cam in the wheel mounts allows for simple micro adjustment on the height of the sliding door.

The track is aluminum so it can be cut to length if necessary with basic tools.

Available in a rustic black or aluminium finish, the track will complement your existing décor.

If you are interested in Mikron's "Barn Door Track System" please fill out the form below.

Mikron Woodworking Machinery Inc.
1588 Highway 60, Renfrew, Ontario, Canada K7V 3Z6

Telephone: 613-433-9391
Toll-Free: 1-800-496-4589
Fax: 613-432-1270

Production capacity is what drives the MIKRON R200 Automatic Rosette Maker, and producing up to 500 rosettes per hour with this powerful tool is a cinch. Productivity. Portability. Reliability. Keywords that are synonymous with the MIKRON R200.

Produces Up To 500 Rosettes Per Hour!

The MIKRON R200 Rosette Maker is a handy solution for the woodworking shop requiring a small, transportable, reliable and cost-effective solution.

Small enough to be taken to the job, rugged enough to produce large quantities of rosettes, the MIKRON R200 Automatic Rosette Maker is designed with accuracy and reliability in mind. Easy to set up and operate, the MIKRON R200 uses standard rosette cutting heads and can produce up to 500 rosettes per hour.

Wood blanks are simply stacked in the hopper, the cutting head is aligned and the rest is left up to the MIKRON R200. The feed mechanism will line up the blanks, the cutting head will produce the rosette and a piston mechanism will eject it into a container.

Like the MIKRON M645, the MIKRON R200 is made of high quality steel and precision manufactured to need little maintenance, while providing efficient, cost-effective solutions to your rosette production requirements.

Features

• automatic loading and clamping
• hydraulic feed
• handles 2-1/2" to 5" squares
• high speed cutter (7500 rpm)
• automatic high speed ejection
• uses standard rosette corrugated 2-knife cutting heads 2-7/8" diameter or 3-1/2" diameter included by Mikron at no charge.

Bringing the Art of Moulding to New Heights...

The MIKRON M645 Multi-Moulder is a versatile moulding machine, capable of handling many different kinds of results. From simple, straight mouldings, curved mouldings, circular mouldings, to bar rails and stairs, the MIKRON M645 is designed to meet your most demanding requirements. Create completely new moulding styles or use the MIKRON M645 to match existing mouldings—including restorations to original architectural moulding styles designed over the last several hundred years. There is no limit to its capabilities.

THE MOULDER THAT MAKES A UNIQUE STATEMENT^©

Regardless of what curves designers and architects throw at you, the MIKRON M645 Tilting-Arbor Multi-Moulder can handle them all.

The MIKRON M645 is designed to meet the needs of the progressive architectural woodworker.

This unique machine provides quality and productivity-conscious woodworking shops with the versatility they need to handle the production of any and all types of mouldings.

Can your moulder make Soft Corners?

We have developed a Soft Corner Attachment that will allow you to make soft corners that match your custom mouldings profiles.

...Learn more

Can Your Moulder Do This?

The MIKRON M645 Multi-Moulder is a powerful machine that is designed to provide its owners with an extensive array of capabilities. See the below Features for complete information.

The MIKRON M645 is a solidly built unit using a revolutionary approach to forming complex mouldings safely and accurately. Featuring a patented adjustable tilting-arbor head and floating tabletop, a variable speed feed motor and a precise tracking system, you can produce circles, ellipses, stair parts, curved crowns, bar rails and of course, straight mouldings up to 6" wide, with the greatest of ease.

There are machines with vertical tilting spindles and power feed, but the MIKRON M645 is the first and only horizontal tilting spindle and feed system for curved and elliptical mouldings, combined into one unit.

Features

• manually tiltable spindle from 0° to 52°! MIKRON has re-engineered the tilt system so that customers can now reach up to 52°, which the marketplace is demanding for crown mouldings, and many other applications. This new feature is standard on all newly manufactured MIKRON M645 Multi-Moulders!
• digital readout by Accurate Technology. This is a digital read-out system which MIKRON can install for you. This is an optional component that will give you accurate depth of cut every time - within + or - 0.002" / lin. ft. (+ or - 0.165mm/lin. m).
• floating worktable
• variable speed feed motor — 0 to 30 feet per minute
• premium control unit — MIKRON has redesigned the electrical units to be more energy efficient and accommodate all voltage requirements. Now the feed motor runs from the same switch panel as the cutter head, and the electrical box is installed inside the base. This is standard on all newly manufactured MIKRON M645 Multi-Moulders! Please specify 220, 440, 480 or 575 voltage requirements at time of ordering.
• separately adjustable feed rollers to enable multiple passes
• axial adjustment
• mechanically adjustable fence for accurate, easy positioning
• linear tracking system guides the work piece smoothly and directly under the cutter head, while keeping it flat
• go from straight to curve in just one setup — no accessories required
• maximum cut is 6" wide by 6-1/2" thick
• uses a standard 4" diameter, 2 knife corrugated back cutter head (1 included)

Specifications

A New Generation of Moulder...

The First-Ever Horizontal Spindle System with Vertical Router System!

M652R Multi-Moulder and Router

A new generation of moulder... When MIKRON's engineers designed the MIKRON M652R Multi-Moulder and Router, they made sure that they kept all the same, powerful features of the MIKRON M645. Then they added routering capabilities. That means, with just a few simple steps, you can replace the spindle with a router mount, providing you with the means to easily router insets and channels on both straight and curved mouldings — ideal for windows, mirrors, pictures, paintings, cabinets, doors, flooring and more! And that's only part of the capabilities of the M652R.

Power. Precision. Speed

MIKRON's new M652R is built for just those reasons.

When our engineers designed the MIKRON M652R, we made sure that they kept all the same powerful features of the M645. Then they added routering capabilities. That means, with just a few simple steps, you can replace the spindle with a router mount, providing you with the means to easily router insets and channels on your straight and curved mouldings—ideal for windows, mirrors, pictures, paintings, cabinets, doors, flooring and more! And that's only part of the capabilities of the M652R.

Designed for Architectural Designers

The MIKRON M652R meets the needs of progressive architectural woodworkers and cabinetmakers. This unique machine, a first in its class, provides the quality and productivity levels for woodworking shops everywhere. Known for its versatility, the M652R Multi-Moulder and Router handles the production of any and all types of mouldings. In fact, many woodworking shops have several of our M645's on the floor because of the extensive demand for custom mouldings. Like the M645, the M652R produces the results that are needed for today's woodworking professionals.

Solidly Built and Patented

The M652R is heavy, and solidly built. This stability and our patented adjustable tilting-arbor head and floating table provides a revolutionary approach to forming complex mouldings safely and accurately. The variable speed motor and precise tracking system allows you to create circular, elliptical and straight mouldings, stair parts, curved crowns, bar rails, door panels, and much more with the greatest of ease.

Curves and Straight Mouldings in One Setup

The MIKRON M652R and M645 are the first and only moulders with a horizontal tilting spindle and feed system for circular, elliptical, curved and straight mouldings combined in one unit. The MIKRON M652R, just as with the M645, are also the only moulders that can produce curves and straight mouldings with one setup—there's no additional hardware or add-ons required.

Features

• manually tiltable spindle from 0° to 52°
• digital readout by Accurate Technology (optional)
• floating worktable
• variable speed feed motor — 0 to 30 feet per minute
• premium control unit — available in 220, 440, 480 or 575 voltage requirements
• separately adjustable feed rollers to enable multiple passes
• axial adjustment
• mechanically adjustable fence for accurate, easy positioning
• linear tracking system guides the work piece smoothly and directly under the cutter head, while keeping it flat
• go from straight to curve in just one setup — no accessories required
• maximum cut is 6" wide by 6-1/2" thick
• uses a standard 4" diameter, 2 knife corrugated back cutter head (1 included)
• 7-1/2 HP 3-Phase Baldor Super E Motor
• 3-1/4 HP 5-Speed Porter Cable Router with 1/2" shank (included)
• option available for an 8" spindle and cutterhead

Specifications

Some of the Styles You can do with the MIKRON M652R

So, can your moulder do curves like this?

MIKRON recommends the following website:

WoodWeb Industry Forums

Pittsburg State University has been awarded with a brand new M652R Multi-Moulder with Router System, by MIkron. The university will be using this machine in their Wood Technology program, for the 2003-2004 year semesters. Recently the class went on a trip to visit a Mikron customer in the area for some training.

"The trip was great ! We spent a great deal of time at Kerr Millwork. They gave us several suggestions on set-up, and gave us a great demo. Kerr Millwork are very pleased with their machine. They referred to their Mikron as 'A real money maker'. When asked about weak points, the only comment they had to say was, that they did not have enough dust collection to support the power of the cutting. Students and the faculty are greatful to Kerr MIllwork for their excellent training on a Mikron."

Kerr Millwork
Lockwood, Missouri
Tel. (417) 232-4522

"What can one say! Your M645 Molder is one of the best machines that we have owned. We have a small molding machine that would only allow you to run radius or straight, but your machine will allow us to do complete circles, ovals, and almost anything in between. It is like getting out of a small compact car and getting into a BIG luxury SUV.....

My compliments to Jeremie and the crew....I really appreciate the service and technical answers that you have given us.

Thanks again,
Joe & Henry Rogers
Rogers Custom Millwork
Jonesboro, AR
Tel. (870) 933-0057
email: rcm2840@sbcglobal.net

The following photos have been submitted by TriStar, and are displayed with thanks.

"When we purchased the Mikron M645, we knew it was a great machine for our company. I then purchased a machine which was supposed to be better. I then spent a lot of time figuring this machine out, but in the end I had to resell it at a loss because the setup time was eating away at too much of my profits.

By far, the Mikron M645, with its ease of set up and quality of workmanship is next to none. Thank you for your support and a great machine."

Sincerely,
Cliff Denison

If you would like to speak with Mr. Cliff Denison, you can reach him at:

Cliff Denison
Denison Woodworking
Michigan, USA
Tel. (248) 969-0295

"I recently started a small scale mill shop producing primarily curved and elliptical mouldings. I have been doing fairly well on casings but I have a customer wanting a 12' curved American cherry 4 5/8 crown. I use a Mikron Multi-Moulder for profiling which has a 52 degree tilting cutter head specifically for for this purpose.

The Mikron M652R, with the 7.5 hp motor and router attachment, is one of the best and most versatile machines I have ever seen. I purchased one for doing curved stock and since it showed up the only thing my shaper is used for anymore is collecting dust. Its a little pricy, but with a little imagination its potentials are limitless."

James King
King Products and Services Inc.
Charleston, South Carolina
Tel. (843) 224-7351

"We currently have 45 manufacturing employees in our architectural millwork facility. In our trim department for profiling, we have a 5 head moulder, 2 shapers, 2 router tables and an M645 Multi-Moulder. The M645 which was first purchased for radius "odd" work has now become a vital part of our trim department. It is very user friendly, safe, accurate set-up and the quality it produces is as good as or better than the 5 head moulder. The only thing "odd" about the M645 Multi-Moulder is when it is not running. It is an excellent investment for any size shop."

John Casciato, Production Manager
Allegheny Millwork
104 Commerce Blvd.
Lawrence, PA 15055
Tel. (724) 873-8700, Ext. 250
Fax (724) 873-8888
email: johnc@alleghenymillwork.com

Dave from Straight Cutz Inc. is a very pleased customer. In fact, he's so proud of the MIKRON R200 Rosette Maker that he's willing to to discuss it's great features with anyone, and if you're in the Toronto area, give him a call and he'll be pleased to show you how it works!

Dave
Straight Cutz Inc.
1A Head Street
Dundas, ON L9H 3H2
Tel. (905) 628-4800

We at MIKRON Woodworking Machinery would like to extend our appreciation to Tom Fantaccione of The Woodshop for all his excellent work in helping us create our new video. Tom is one of MIKRON's most successful customers with the MIKRON M645 Multi-Moulder. Here is what Tom has to say about the MIKRON M645:

"Overall, I can say that the MIKRON M645 has made a significant difference in the type of job we can tackle now, to the safety of our team and to our bottom line. This multi-moulder paid for itself on our first job and we have been operating it at least 3 days per week for 4 years now! It's the best bang for our buck!"

If you have any questions concerning his success with the MIKRON M645, we're sure Tom won't mind answering them. You can reach him at:

Tom Fantaccione
The Woodshop Inc.
58 Flint Road
S. Toms River, NJ 08757
Tel. (732) 349-8006 • Fax (732) 349-2708

Butch, a proud owner of the MIKRON R200 Rosette Maker is a very satisfied customer. You can reach Butch at:

Butch
Baird Brothers Sawmill Inc.
7060 Crory Road
Canfield, OH 44406
Tel. (330) 533-3122 • Fax (330) 533-0781

To locate a dealer near you, simply click on your Province or State below.

Placing your mouse over the label of a Province or State will show the full name.

If you are interested in joining our growing list of Authorized Dealers,
please contact Jeremie Paulin at 1-800-496-4589.

Choose from a variety of monthly payment options for budget-conscious businesses seeking an affordable path to ownership.

• Match cost-benefit of your machine by spreading the expense over several years.
• Preserve your cash and working capital.
• Gain Tax Benefits.

When it comes to special programs and financing options, there are a number of ways to equip your business with woodworking machinery.

To get a quote, simply enter in the machine dollar amount, and then your email address. A quote for financing will be sent INSTANTLY to your inbox, it's that simple!

To apply now, click here to use our online application for financing.

Mikron Woodworking Machinery Inc.
1588 Highway 60, Renfrew, Ontario, Canada K7V 3Z6

Telephone: 613-433-9391
Toll-Free: 1-800-496-4589
Fax: 613-432-1270

Jeremie Paulin
President / Sales Manager / Technical Advisor
jeremie@mikronmachinery.com

General Inquiries
info@mikronmachinery.com

MIKRON has recently released two newly patented machines: the M652R Multi-Moulder and Router, and the R300 Large Size Automatic Rosette Maker. These new machines are built strong, just like their predecessors, the patented M645 Multi-Moulder and R200 Automatic Rosette Maker, which have been industry favorites over the past few years. In fact, some woodworking shops and cabinet makers have acquired several of each machine to keep up with increased production demands.

Versatility. That's another key word you need to associate with MIKRON's woodworking machinery. All machines are manufactured to meet the demanding requirements of woodworkers and cabinet makers everywhere. MIKRON's skilled employees, precision manufacturing processes, creative solutions and proven track record provides the strong background for developing effective ways of approaching challenging tasks, and moving new ideas to the customer's production line.

Founded in 1995, MIKRON is backed by a steel fabricating operation that has been in business since 1964. Under the leadership of Ron Arbuthnot, the MIKRON Team is dedicated to producing superior quality machines. The 12,000 square foot manufacturing facility is equipped with such advanced machinery as CNC lathes, computerized drill presses, brake presses, cutters and saws, grinders and all forms of welding equipment. This provides MIKRON with the ability to do all manufacturing in-house, maintaining optimal quality control at all times.

With a no-nonsense approach to product development, MIKRON's engineers ensure the end product is practical, functional, efficient, safe and cost-effective. The MIKRON Team works hard to find solutions for their customers and are constantly looking for new methods to improve their products. Quality Control ensures all machines measure up to the highest standards before they leave the facility.

You are invited to contact one of MIKRON's knowledgeable and friendly staff to answer all of your needs, or you can visit our Request Info page.

With its new 8" spindle option, Mikron’s M652R horizontal spindle moulder with vertical router just got better.

Say goodbye to cutting tight curves in segments and piecing them together. Mikron’s new 8" spindle option allows you to cut a tighter radius in a single piece, in one run, saving you precious production time and hassle. That translates to more profit making its way to your bottom line.

Lighter, more versatile

Mikron has solved the problem of the cutter head diameterthat can distort the profile by hitting the wood too soon. This revolutionary new lighter 8" spindle uses a hardened, anodized aluminum cutting head that allows it to retain its 4" diameter. The result: tighter, cleaner profile on the radius piece and radius cuts for precision circular, elliptical, windows, curved crowns and more with ease.

The new 8” spindle is also safer for the operator than using an 8" shaper.

Versatility that’s first in its class…

Mikron’s new generation of multi-moulders are the only moulders that can produce curves and straight mouldings with one setup, with no additional hardware or add-ons required. Changeover time for the 8" spindle option is less than 5 minutes.

Mikron’s 8" spindle option includes:

• 8" spindle with hardened, anodized aluminum cutting head
• spindle assembly that slides easily into M652R for quick changeover

Contact us for information on what is avaialble 

High-quality, innovative tools for woodworkers and cabinet makers everywhere.

Elliptical / Arch Forming Rack Machine

Multi Moulders: M645 & M652R
Rosette Machine: R200 Rosette Maker

Best New Woodworking Machine for Architectural Laminating to Date!

Our new Elliptical / Arch Forming Rack Machine received rave reviews during the 2007 Association of Woodworking & Furnishings Suppliers show in Las Vegas.

To the left of the machine you can see two optional radii plates. Plates can be created to suit almost any curvature or application.

This forming rack will meet your most demanding forming requirements with the most versatility and affordability on the market.

This specialized equipment will allow you to create custom, complex:

• Ovals
• Ellipses
• Arches
• Quarter Rounds
• Panels
• Doors
• Custom Jams
• Curved Crowns
• Small to large radii